How to run Kismet on the SL-6000L

Yo tengo cracko 1.23, no obstante a ver si le echo un ojo

Gracias por la aportación

Kismet on Zaurus SL-5600 and SL-5500 with ROM 3.10 or higher

Kismet on Zaurus SL-5600 and SL-5500 with ROM 3.10 or higher

The purpose of this document is to provide a step-by-step for setting up kismet, the wireless network sniffer, on a Zaurus SL-5600 or SL-5500 with ROM 3.10 or higher. This document is necessary because Sharp has altered the way the wireless device works in recent ROMS.

To do this you will need a console installed on your Z.

Files Needed:

Install Kismet
Install Kismet as you normally would. Use the GUI or do it from the command line.

tar zxvf kismet-zaurus-arm-2.8.1.tar.gz
cd kismet-arm
ipkg install kismet_zaurus_2.8.1_arm.ipk

Install Kismet-Qt/e
Install Kismet-Qt/e as you normally would.

ipkg install kismet-qt_1.4.0_arm.ipk

Now here is where we get crazy...
First we need to create a wireless network connection for the Z use wake-up the wireless card with:
Go to the Settings tab and tap Network. Select 'New', select 'Wireless LAN - TCP/IP' and 'Add'. Use the following settings to configure the connection:

Name: Kismet

check 'Non-Spec ESS-ID: "ANY"'

IP Address:
Subnet Mask:

In the above configuration, the actual IP address is not important, what's important is that the Z won't be looking for a DHCP server.

Next create a script to launch Kismet.

cd /home/QtPalmTop/bin

Enter the following:
cardctl scheme CardResume
cardctl scheme qpewlan1 & # SEE NOTE BELOW
cardctl scheme CardSuspend

# where it says 'qpewlan1' may be different on your Z, the number corresponds to the wireless connection you created. If the 'Kismet' connection was your first connection, qpewlan1 is probably right. to be sure take a look at /etc/pcmcia/network.opts and find the line INFO="Kismet" and see which qpewlan is directly above it. change to match.

Next make kismet_qt run as root

chmod 4755 /usr/bin/kismet_qt

Now make the kismet icon execute the script instead of kismet_qt:
Either launch the 'Tab Setting' app and edit the Kismet launcher 'Program:'


Edit the fie directly:
vi /home/QtPalmTop/apps/Application/kismet_qt.desktop
Change 'Exec = kismet_qt' to 'Exec ='

Finally, make the launcher run as root: Tap and hold the kismet icon, when the properties window opens check the "Execute with root priviledges" checkbox.

That's it! Now when you put your wireless card in, and tap the kismet icon, kismet will launch properly, and when you close kismet_qt you card will go back to sleep!

What's going on here?
When you tap the kismet icon, the script we created is executed. Let's look at it line by line:

cardctl scheme CardResume
- This tells the wireless card to wakeup, launching this way skips the check that would normally send the card back to sleep after not finding an AP to connect to.

cardctl scheme qpewlan1 &
- This tells the card to configure itself for the connection we created. Not looking for a DHCP server prevents the timeout that would also send the card to sleep.

- This launches kismet_qt, which will automagically launch kismet_hopper, and kismet_server.

At this point our script pauses, as it waits for kismet_qt to finish! The script will hang here until kismet_qt is closed.

cardctl scheme CardSuspend
- This line tells the card that we done, and puts the wireless device back to sleep.

Kismet Qt/e

Index of /zaurus/kismet

Index of /zaurus/kismet/old

The Kismet Command-Line Interface

Kismet - ARM-Zaurus


[KISMET] Script bug on Zaurus;

Kismet on Sharp Zaurus

0 ¿Algo que Comentar?:

Dentro del espejo

Hay un tipo dentro del espejo que me mira con cara de conejo ¡Oye, tú! tú que me miras.
Oye tú, no te acerques demasiado, busco pelea y estás a mi lado. De un puñetazo me cargo el espejo, le rompo los dientes a cara de conejo.
Hay un tipo dentro del espejo que me mira con cara de conejo

Sintoniza con Cara Conejo

Blog Archive